Circuit breaker analyser selector
Describe the circuit breaker you are going to test and the tests you need to carry out. The tool works out the channels and the performance your specification demands and proposes the analyser that covers it, starting with the most economical option.
01 · The circuit breaker
1 interrupter
2 interrupters
4 interrupters
02 · Tests you need
Tick only what your test specification calls for: every extra feature moves the unit up. The options that grey out are not offered by any unit alongside what you have already ticked, and they say what blocks them.
03 · Working conditions
Preferences and add-ons
04 · Technical recommendation
No results yet
Describe the circuit breaker, tick the tests you need, and click Find a unit.
05 · Send this selection to AMPERIS
An AMPERIS engineer will review your case and reply with a tailored proposal. The technical report of the selection shown above is attached to the message automatically and you receive a copy.
Enquiry sentThank you. We have received your selection and have sent a copy of the report to your email address. We will reply as soon as possible.
How it selects: in a circuit breaker analyser the deciding quantity is not a voltage, it is the
number of timing channels: 3 × the interrupter units per phase. From there come the
features each test demands — coil control outputs (2 with a gang-operated mechanism, 6 with an independent
pole operated one), transducer channels, micro-ohmmeter, both-sides-grounded measurement — and among the units
that cover everything the lowest-cost one is offered first, with its basic accessories included.
Please note: this is an indicative preselection tool. It does not replace a review of the test specification, of the applicable standard (IEC 62271-100, IEEE C37.09) or of confirmation of availability. Consult an AMPERIS engineer before closing a purchase.
Please note: this is an indicative preselection tool. It does not replace a review of the test specification, of the applicable standard (IEC 62271-100, IEEE C37.09) or of confirmation of availability. Consult an AMPERIS engineer before closing a purchase.